ARB Air Compressor, 12 Volt, Twin, Portable with Carrying Case
ARB Air Compressor, 12 Volt, Twin, Portable with Carrying Case
ARB Air Compressor, 12 Volt, Twin, Portable with Carrying Case
ARB Air Compressor, 12 Volt, Twin, Portable with Carrying Case

ARB Air Compressor, 12 Volt, Twin, Portable with Carrying Case

Regular price$990.00
Shipping calculated at checkout.

  • In stock, ready to ship
  • Backordered, shipping soon

12V Twin Portable ARB Air Compressor with Carrying Case

  • Voltage: 12 Volt
  • Current Draw- Load/ No Load: 50/ 28 Amps
  • Air Flow- Load/ No Load: 4.65/ 6.16 CFM
  • Size- Inches: 7.5 x 18.9 x 13.4
  • Duty Cycle: 100%
  • Weight: 20 lbs.
  • Manufacturer: ARB
  • Warranty: 2 Year


Ultra compact twin motor, dual cylinder design makes this the highest flowing portable compressor of its size on the market at 174LPM [6.16CFM].
Integrated aluminum air tank and pressure switch regulates pressure between 930kPa [135PSI] and 1030kPa [150PSI] which is suited to most air powered tools.
Mounted in a waterproof carry case constructed from a durable impact resistant polymer. The carry case has convenient compartments for storing the air hose and other compressor accessories.
Ducted IP55 sealed brushed DC cooling fan and anodized aluminum motor mounting brackets effectively dissipate heat from the motors, heads and electronics allowing for a 100% duty cycle (under room temperature conditions).


  • Anti-vibration / sound deadening is integrated into the mount.
  • Engineered, built and individually dyno-tested in Australia from local and imported components.
  • Fully serviceable with all replacement parts available.
  • Constructed primarily of light weight, high strength engineering grade materials, including military and aerospace standard components.
  • Hard-anodized cylinder bores and PTFE (Teflon) impregnated carbon fiber piston seals for reduced friction and maximum trouble free life.
  • Built with sealed components for moisture and dust resistance.
  • Motors are water sealed, 100% ball bearing equipped (i.e., no bushings used), and feature a unique linear brush pre-load system for extra long life, low heat and quiet operation throughout the life of the unit.
  • Compressor pistons are equipped with high shock rated roller bearing.
  • High density and high flow washable sintered bronze air filter element.
  • Motors are thermal cut-out protected against damage caused by extreme temperature use.
  • Pressure switch and relay equipped electrical system prevents run-on when not filling, or any damage to compressor or hoses as a result of the pressure generated from a kinked air line.
  • Illuminated isolating switch is easy to see at night, and protects the user from hazardous sparking when connecting the alligator clips to the battery terminals.
  • Equipped with dual heavy duty Maxi-Fuses for professional in-line circuit protection and true circuit redundancy in case of a fault.
  • Over-pressure safety valve equipped as a back-up protection from either pressure switch failure, thermal over pressure generated in a hot vehicle (i.e., no need to drain pressure when finished use.), or accidental connection to an external high pressure source.
  • CE and C-Tick compliant.


  • After looking at the many cases available on the market, ARB Engineers decided that none met the exact requirements for the ARB Twin Portable compressor. The case needed to be compact, yet hold all accessories and air tank whilst also being extremely strong to handle the rigors of 4WDing and commercial use. Considerable time was therefore spent designing and testing a case that has features unique to ARB.
  • Enlarged carry handle to suit a gloved hand.
  • Enlarged latches to suit a gloved hand.
  • Aluminum latches ensure that no compression set in the latches occurs over time and so we were able to reduce the clamping force (make them easier to unlatch) versus our competitors who all use plastic latches that will loosen up over time, and have subsequently needed to make their latches extra-extra uncomfortably tight when new to compensate.
  • One piece heavy duty hinge.
  • Shatterproof polymer compound (airport tested!)
  • 2 sides are textured, logoed, generally attractive and not just the top as with most other cases.
  • Air travel equalizer valve to combat cabin pressure crush when landing.
  • Water tight seal in lid.
  • Volume of case will assure the portable CKMTP12 floats if dropped in water.
  • Quick-change (removable) accessory pocket mounts.
  • Slotted internal design to suit organizers/dividers (not included).


  • Fully assembled and performance tested air compressor and air tank mounted into a water proof carry case.
  • Canvas compartment for storing air hose and compressor accessories.
  • OEM quality illuminated compressor isolating switch.
  • High quality wiring loom with automotive grade alligator clamp type battery contacts, and a pressure switch driven automotive relay control circuit.
  • Two splash resistant air filters with washable high-flow sintered bronze filter cartridges.
  • 6 meter [20 ft] long high quality abrasion and heat resistant air hose with male to female couplings.
  • Hose couplings are specially designed corrosion resistant, one-handed (push-lock) quick connect type to suit
  • US industrial standard air fittings
  • Air blow gun with US industrial standard male air fitting.
  • Inflation accessories kit including high-flow tire filler attachment (US industrial standard) with integral stop-valve, a Schrader valve to US industrial standard adapter, and extra nozzle attachments for inflating items such as sports balls, air mattresses, etc.
  • Comprehensive photo illustrated operating instructions.


  • Rapid inflation of small, medium and large tires
  • Air tools rated up to 174LPM (6.16CFM) continuous supply.


  • Twin Motor Air Compressor
  • Aluminum Air Tank
  • Waterproof Carry Case
  • Wiring Loom
  • 20ft Air Hose
  • Air Blow Gun
  • Nozzle Attachments

Inventory Status and Definitions

Inventory Status can be found on each product page. If no status is shown, then inventory is not tracked for that product. Inventory Status is subject to change without notification.


In-Stock - Item is in stock and ready for shipping. Please allow 5-7 business days for the order to be shipped. Orders are shipped in the order they are received. 

Pre-Order - Pre-order items are new products. Items become available as "Pre-Order" when a batch is in the queue to be manufactured, allowing customers to order and reserve the product before it is ready to ship. Please allow 4-5 weeks, from when your order is placed, for the "Pre-Order" item to ship. 

Back-Order - Items will be marked as "Back-Order" when the item is out of stock, but is "in process" of being manufactured. Allowing customers to reserve an item before it is ready to ship. Please allow 2-3 weeks, from when your order is placed, for the "Back-Ordered" item to ship.

Out of Stock - Item is not in stock and not available for purchase. Please sign up on the product page to be notified when "Out of Stock" items are available for ordering. 

Built to Order - Item begins the manufacturing process when order is received. Typically components are stocked, but the item isn't sent to welding/assembly until an order is received. Please allow 3-4 weeks for "Built to Order" items to be shipped. 

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

You may also like

Recently viewed